Integra (RS, LS) L4-1834cc 1.8L DOHC PFI (1995)
CYP Sensor: Service and Repair
Installation
Distributor Installation
1. Coat a new O-ring with engine oil then install it.
2. Slip the distributor into position.
NOTE: The lugs on the end of the distributor and its mating grooves in the camshaft end are both offset to eliminate the possibility of installing
the distributor 180° out of time.
3. Install the hold-down bolts and tighten temporarily.
4. Connect the 2-P and 8-P connectors to the distributor.
Spark Plug Wire Arrangement
5. Connect the spark plug wires as shown.