Integra (RS, LS) L4-1834cc 1.8L DOHC PFI (1995)
/l4-1834cc_1.8l_dohc_pfi/Page-3170003.png)
-
Loosely install all four mounting nuts.
-
Tighten the upper two nuts first, then the lower two nuts. Adjust the lower mounting bracket if necessary.
5. Remove and properly store the short connector(s), then reconnect the airbag connector(s).
-
Remove the short connector (RED) from the front passenger's airbag connector, then connect the airbag 3-P connector to the SRS main harness
3-P connector.
-
Then reinstall the glove box on the dashboard.
6. Connect the battery positive cable, then the negative cable.
7. After installing the airbag assembly, confirm proper system operation:
-
Turn the ignition ON (II): The instrument panel SRS indicator light should come on for about six seconds and then go off.
-
Make sure both horn buttons work.
-
Take a test drive and make sure the cruise control set/resume switch works.
8. Enter the code number to restore radio operation.
