Integra (RS, LS) L4-1834cc 1.8L DOHC PFI (1995)
/l4-1834cc_1.8l_dohc_pfi/Page-3009003.png)
5.
Install the new bushing with the short end toward the outside of the vehicle. Align the arrow with the mark you made on the trailing arm.
6.
Press the new bushing into the trailing arm until its edge is 10 to 12 mm above the surface of the arm.
7.
Reinstall the trailing arm.
8.
If necessary, repeat steps 1 thru 7 to install a new bushing in the other rear trailing arm.
9.
Bleed the brake system.
NOTE:
ISIS online service manual information is only available for vehicles 1990 and newer.
^
Refer to the brakes section of the appropriate service manual, or
^
1990-93 Integra:
Online, enter keyword BLEED and select Brake
System Bleeding Inspection and Adjustment
from the list.
^
1994-01 Integra:
Online, enter keyword BLEED and select Brake
System Bleeding from the list.
10.
Check the wheel alignment, and adjust it if necessary.
^
Refer to the suspension section of the appropriate service manual, or
^
Online, enter keyword ALIGNMENT and select Wheel Alignment - Front and Rear Toe Inspection/Adjustment from the list.
Disclaimer
