Integra GS-R L4-1797cc 1.8L DOHC (VTEC) PGM-FI (2001)
Power Distribution Relay: Testing and Inspection
RELAY TEST
Normally-Open Type
1. Remove the power relay from its socket.
2. Check continuity between relay terminals.
-
There should be continuity between the A and B terminals when power and ground are connected to the C and D terminals.
-
There should be no continuity when power is disconnected.
Type 1
Type 1
Type 2
Type 2
-
Power Window Relay
-
Radiator Fan Relay
-
Blower Motor Relay
-
A/C Compressor Clutch Relay