Integra GS-R L4-1797cc 1.8L DOHC (VTEC) PGM-FI (2001)
Differential: Service and Repair
With Transmissions Numbered S80-3089682 and Lower
BACKLASH INSPECTION
1. Place differential assembly on V-blocks and install both axles.
2. Measure the backlash of both pinion gears.
3. If the backlash is not within the standard, replace the differential carrier.
FINAL DRIVEN GEAR REPLACEMENT
1. Remove the bolts in a crisscross pattern in several steps, then remove the final driven gear from the differential carrier.
NOTE: The final driven gear bolts have left-hand threads.
2. Install the final driven gear by tightening the bolts in a crisscross pattern in several steps.
TAPERED ROLLER BEARING REPLACEMENT
NOTE: