Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
Brake Caliper: Service and Repair
Disassembly and Assembly
DISASSEMBLY
Remove Piston Boot
1. Remove the piston by rotating the piston counter-clockwise with the special tool (locknut wrench) and remove the piston boot.
CAUTION: Avoid damaging the piston seal.
Remove Piston Seal
2. Remove the piston seal.
CAUTION: Take care not to damage the cylinder bore.
Caliper Body And Spring Cover
3. Install the special tool between the caliper body and the spring cover then position the locknuts as shown. Turn the shaft until the plate just
contacts the caliper body.