Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
_mfi/Page-3010002.png)
Brake Hose And Banjo Bolt
5. Install the brake hose on the knuckle and damper first, then connect the brake hose to the caliper with the banjo bolt and new sealing washers.
6. Install a new brake hose clip on the brake hose.
Brake Pipe And Brake Hose
7. Connect the brake line to the brake hose.
8. After installing the brake hose, bleed the brake system. See: Brake Bleeding/Service and Repair/Bleeding Procedures
9. Perform the following checks.
- Check the brake hose and line joint for leaks, and tighten if necessary.
- Check the brake hoses for interference or twisting.
