Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
Crankshaft Main Bearing Seal: Service and Repair
INSTALLATION NOTES
NOTE: The seal surface on the block should be dry. Apply a light coat of oil to the crankshaft and to the lip of the seal.
1. Drive in flywheel end seal against right side cover.
NOTE: Drive the end seal in squarely.
2. Confirm that clearance is equal all the way around with a feeler gauge.
Clearance: 0.5 - 0.8 mm (0.02 - 0.03 inch)