Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
_mfi/Page-3362001.png)
Blower Motor: Service and Repair
Blower Unit Removal and Installation
Blower Unit / Replacement
NOTE: The blower motor, recirculation control motor and blower resistor can be replaced without removing the blower unit. See: Overhaul
1. Remove the glove box.
2. Remove the four bolts and the glove box frame.
3. Without Air Conditioning
Remove the wire harness clips from the heater duct. Remove the four self-tapping screws and the heater duct.
3. With Air Conditioning
Remove the evaporator.
