Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
_mfi/Page-2148001.png)
Variable Valve Timing Solenoid: Testing and Inspection
Component Inspection
1. Disconnect the 1P connector from the VTEC solenoid valve.
2. Measure resistance between the terminal and body ground.
Resistance: 14 - 30 ohms
3. If the resistance is within specifications, remove the VTEC solenoid valve from the cylinder head, and check the VTEC solenoid valve filter for
clogging.
If there is clogging, replace the engine oil filter and the engine oil.
