Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
Alternator Brush: Testing and Inspection
Alternator Brush Inspection
1. Remove the end cover, then take out the brush holder by removing its two screws.
2. Measure the length of the brushes with a vernier caliper.
Alternator Brush Length:
Standard: 10.5 mm (0.41 in)
Service Limit: 1.5 mm (0.06 in)
If the brushes are less than the service limit, replace the brush holder assembly.