Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
Fluid Pump: Testing and Inspection
1. Install the ATF pump gears and ATF pump driven gear shaft in the main valve body.
NOTE:
-
Lubricate all parts with ATF during inspecting.
-
Install the ATF pump driven gear with its grooved and chamfered side facing up as shown.
2. Measure the side clearance of the ATF pump drive and driven gears.
-
ATF Pump Gears Side (Radial) Clearance: Standard (New):
Drive gear: 0.210 - 0.265 mm (0.0083 - 0.0104 inch)
Driven gear: 0.070 - 0.125 mm (0.0028 - 0.0049 inch)