Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
_mfi/Page-2624002.png)
4. Hold 2nd gear against the 2nd clutch, then measure the clearance between 2nd gear and 3rd gear with a feeler gauge.
NOTE: Take measurements in at least three places, and use the average as the actual clearance.
-
STANDARD: 0.05 - 0.13 mm (0.002 - 0.005 inch).
5. If the clearance is out of tolerance, remove the thrust washer and measure the thickness.
