Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
Clutch Master Cylinder: Service and Repair
CAUTION:
-
Do not spill brake fluid on the car: it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
-
Plug the end of the clutch pipe and reservoir hose with a shop towel to prevent brake fluid from coming out.
1. Remove the brake fluid from the clutch master cylinder reservoir with a syringe.
2. Disconnect the clutch pipe and reservoir hose from the clutch master cylinder.
3. Pry out the cotter pin, and pull the pedal pin out of the yoke. Remove the nuts.
4. Remove the clutch master cylinder.