Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
_mfi/Page-2732001.png)
Pressure Plate: Service and Repair
TOOLS REQUIRED
-
07LAB-PV00100 Ring Gear Holder
-
07NAF-PR30100 Clutch Alignment Shaft
-
Or Equivalent
INSTALLATION
1. Install the ring gear holder.
2. Apply grease to the spline of the clutch disc, then install the clutch disc using the special tools as shown.
NOTE: Use only Super High Temp Urea Grease.
3. Install the pressure plate.
