Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
Mainshaft: Service and Repair
Overhaul
TOOLS REQUIRED
-
07746-0030100 Driver, 40 mm I.D.
-
07746-0030400 Attachment, 35 mm I.D.
-
07746-0030300 Attachment, 30 mm I.D.
-
Or Equivalent
DISASSEMBLE
1. Remove the ball bearing using a bearing puller as shown.
CAUTION: Remove the synchro hubs using a press and the steel blocks as shown. Use of a jaw-type puller can cause damage to the gear teeth.
2. Support 5th gear on steel blocks, and press the mainshaft out of the 5th synchro hub, as shown.