Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
_mfi/Page-2794002.png)
-
Service Limit: 1.8 mm (0.07 inch).
4. If the clearance is more than the service limit, measure the width of the reverse change holder.
-
Standard: 13.0 - 13.3 mm (0.512 - 0.524 inch).
-
If the width is not within the standard, replace the reverse change holder with a new one.
-
If the width is within the standard, replace the reverse idler gear with a new one.
