Integra GS-R Coupe L4-1797cc 1.8L DOHC (VTEC) MFI (1997)
_mfi/Page-2857001.png)
Transmission Mode Switch: Testing and Inspection
A/T GEAR POSITION SWITCH / TEST
1. Remove the center console, then disconnect the 14-P connector from the switch.
2. Check for continuity between the terminals in each switch position according to the table.
NOTE:
*
Move the lever back and forth at each position without touching the button, and check for continuity within the range of free play of the shift
lever.
*
If there is no continuity within the range of free play, adjust the installation position of the switch.
A/T Gear Position Switch (For cruise control)
3. If necessary, replace the switch.
