Testing and Replacement of Trunk Lamp Switch in Integra GS-R Sedan
_mfi/Page-5317001.png)
Trunk Lamp Switch: Testing and Inspection
Latch Switch Test and Replacement
LATCH SWITCH / TEST AND REPLACEMENT (SEDAN)
1. Open the trunk lid, and disconnect the 2-P connector from the trunk latch switch.
2. There should be Continuity between the A and B terminals.
3. If necessary, remove the three mounting bolts to pull out the trunk latch switch from the trunk lid, then disconnect the lock rod from the trunk latch
switch.
4. Disconnect the trunk opener cable from the trunk latch switch.