Integra GS-R Sedan L4-1797cc 1.8L DOHC (VTEC) MFI (1999)
Child Seat Anchor Plate: Service and Repair
Child Seat Anchor Plate
Attachment points are provided for a rear seat mounted child restraint system which uses a top tether.
The attachment points are located on the rear trim panel or rear shelf, just behind the rear seat-back.
When using a child seat with a top tether, install the child seat anchor plates securely.
Hatchback
NOTE: The rear trim panel has perforations at each attachment point. Cut the rear trim panel along the perforations to make a hole.
Sedan
NOTE: Remove the plug covers from the attachment points of the rear shelf (Canada). Use a razor blade or sharp knife to carefully cut a 1 inch
diameter circle at the location of the attachment point (USA).
NOTE:
-
Do not remove the toothed washer from the child seat anchor plate. Use the child seat anchor plate with the toothed washer attached to it.
-
When installing a child seat on the rear seat, follow the instructions of the manufacturer of the child seat.
-
Additional anchor plates are available.