Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Antenna Mast: Testing and Inspection
POWER ANTENNA MAST / INSPECTION
Sticking Antenna:
The antenna sticks in either the up or down position.
1. Using the antenna wrench, remove the antenna nut, and spacer.
2. Clean the antenna mast housing threads, and reinstall the spacer.
3. Tighten the antenna nut with the antenna nut wrench to 2.3 N.m (0.23 kgf.m, 1.7 lbf.ft). If you overtightened the nut, the antenna may stick. If
sticking occurs, back the nut off a little, then turn the radio ON and OFF to raise and lower the antenna again. Repeat until the antenna moves
freely.
