Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Power Mirror Actuator: Service and Repair
POWER MIRROR ACTUATOR / REPLACEMENT
Removal
1. Remove the power mirror.
2. Cut the actuator wire harness.
NOTE: Before cutting the actuator wire harness, record the actuator terminal locations and wire colors.
3. Remove the power mirror actuator.
Installation
1. Install the actuator in the reverse order of removal.
2. Attach the mirror holder to the actuator by pressing it into place by hand.
CAUTION: When installing the joint pin, make sure
*
not to break the mirror glass.
*
that the rubber is correctly placed and does not gel pinched.
3. Assemble the mirror base and housing by installing the screws.