Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
ABS Modulator Unit: Service and Repair
Wire Harness Replacement
-
Remove the modulator unit from the vehicle.
Modulator Unit And Wire Harness
-
Remove the modulator unit cover, and remove the wire harness.
Set Plate
-
Check the numbers stamped on the set plate, and connect each connector of the new wire harness to the set plate of the corresponding number.
NOTE:
-
Be sure that each connector is locked securely with the two locking tabs.
-
Install the modulator unit cover and modulator unit.
-
Check the ABS function using the ALB checker. See: Testing and Inspection/Component Tests and General Diagnostics/ABS Function Test