Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Lubrication Points On Piston
2. Coat a new piston seal with rubber grease and install the seal in the cylinder groove.
3. Apply seal grease to the sealing lips and inside of a new piston boot, and install it in the caliper.
CAUTION: Be careful not to damage the caliper cylinder wall.
4. Lubricate the caliper cylinder and piston with brake fluid, then install the piston in the cylinder with the dished end facing in.
5. Apply seal grease to the sliding surface of the pins and inside of the new pin boots.
