Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Special Tool:
Brake Spring Compressor # 07HAE-SG00100
CAUTION: Be careful not to damage the inside of the caliper cylinder during caliper disassembly.
NOTE: Do not compress the spring under the spring cover.
Adjusting Spring B And Shaft
4. Turn the shaft counter-clockwise 1/4-1/2 turn to compress the adjusting spring B in the caliper body.
CAUTION: To prevent damage to the inner components, do not turn the shaft more than 1/2 turn.
Locknuts
5. Lower the locknuts fully and tighten the locknuts securely.
NOTE: Keep the locknuts in this position until you reinstall the circlip.