Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Remove Piston With Compressed Air
1. If necessary, apply compressed air to the caliper fluid inlet to get the piston out. Place a shop rag or wooden block as shown to cushion the piston
when it is expelled Use low pressure air in short spurts.
2. Remove the piston from the caliper, and check the piston for scoring on surface.
Piston Boot And Piston Seal
3. Remove the piston boot and piston seal.
CAUTION: Take care not to damage the cylinder bore.
