Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Parking Brake Cable And Cable Clip
10. Insert the cable through the arm, and connect the cable to the lever with the clevis pin and lock pin. Install the cable clip securely.
11. Install the caliper shield.
12. Fill the brake reservoir up, and bleed the brake system. See: Brake Bleeding/Service and Repair/Bleeding Procedures
13. Operate the brake pedal several times, then adjust the parking brake. See: Parking Brake System/Adjustments
14. After installation, perform the following checks.
-
Check for leaks at hose and line joints or connections, and retighten if necessary.
-
Check the parking brake lever for operation, and adjust it if necessary.