Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Brake Master Cylinder: Testing and Inspection
CAUTION:
-
Do not spill brake fluid on the vehicle it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
-
Before reassembling, check that all parts are free of dust and other foreign particles.
-
Do not try to disassemble the master cylinder assembly. Replace the master cylinder assembly with a new part if necessary.
-
Make sure no dirt or other foreign matter is allowed to contaminate the brake fluid.
Master Cylinder Components
CHECKS
Reservoir Cap - Check for blockage of vent holes.
Reservoir Seal - Check for damage and deterioration.
Strainer - Remove accumulated sediment.
Rod Seal - Check for damage and deterioration.
Reservoir - Check for cracks and leaks.
Master Cylinder - Check for leaks, rust and damage.