acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Mode Control Motor|Page 6539 > < Mode Control Motor|Page 6536
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Mode Control Motor

Mode Control Motor / Replacement

1. Disconnect the mode control motor 8P connector, and remove it from the heater unit.

2. Remove the two screws, the mode control motor, and the flange collar.
3. Install in the reverse order of removal.

After installation, make sure the mode control motor runs smoothly.

Mode Control Motor|Page 6539 > < Mode Control Motor|Page 6536