acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Heater-Evaporator Unit Replacement|Page 6798 > < Heater-Evaporator Unit Replacement
Page 2
background image

3. Disconnect the heater hoses from the heater unit.

CAUTION:  Engine coolant will damage paint. Quickly rinse any spilled engine coolant from painted surfaces.

NOTE:  Engine coolant will run out when the hoses are disconnected, drain it into a clean drip pan.

Mounting Nut

4. Remove the mounting nut from the heater unit.

NOTE:  When removing the mounting nut, take care not to damage or bend the fuel pipes, brake pipes, etc.

5. Remove the dashboard.
6. Remove the heater duct See: Blower Motor/Service and Repair/Blower Unit Removal and Installation or the evaporator See: Evaporator

Case/Service and Repair/Heater-Evaporator Unit Replacement.

7. Remove the two bolts, the nut and the passenger's SRS beam.

Heater-Evaporator Unit Replacement|Page 6798 > < Heater-Evaporator Unit Replacement