Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Wheel Bearing: Service and Repair
Front
TOOL REQUIRED
-
07GAF-SE00100 Hub Dis/Assembly Tool
-
07749-0010000 Driver
-
07746-0010500 Attachment, 62 x 68 mm
-
07GAF-SD40700 Hub Dis/Assembly Base
-
07965-SD90100 Support Base
NOTE: Replace the bearing with a new one after removal.
REPLACEMENT (AFTER STEERING KNUCKLE IS REMOVED)
1. Separate the front hub from the steering knuckle using the special tools and a press as shown. Refer to Steering and Suspension. See: Steering and
Suspension/Steering/Front Steering Knuckle/Service and Repair
CAUTION:
-
Take care not to distort the splash guard.
-
Hold onto the hub to keep it from falling when pressed clear.
2. Remove the circlip and the splash guard from the steering knuckle.