Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Throttle Cable/Linkage: Service and Repair
Installation
1. Open the throttle valve fully, then install the throttle cable in the throttle linkage and install the cable housing in the cable bracket.
2. Start the engine. Hold the engine at 3,000 rpm with no load (A/T in (N) or (P) position, M/T in neutral) until the radiator fan comes on, then let it
idle.
3. Hold the cable sheath, removing all slack from the cable.
4. Turn the adjusting nut until it is 3 mm (0.12 in.) away from the cable bracket.
5. Tighten the locknut. The cable deflection should now be 10 - 12 mm (0.39 - 0.47 in.). If not, see Inspection/Adjustment.
