Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Before connecting connectors, make sure the terminals are in place and not bent.
Check for loose retainer and rubber seals.
The backs of some connectors are packed with grease. Add grease if needed. If the grease is contaminated, replace it.
Insert the connector all the way and make sure it is securely locked.
Position wires so that the open end of the cover faces down.
Handling Wires and Harnesses
Secure wires and wire harnesses to the frame with their respective wire ties at the designated locations.
