acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Disconnecting/Connecting Connectors > < Cable Reel Replacement|Page 6993
Page 5
background image

Steering Wheel Nut

17. Install the steering wheel bolt, then install the driver's airbag.

Knee Bolster / Dashboard Lower Cover

18. Attach the 2P and 3P connectors to the connector holder, then install the knee bolster and dashboard lower cover.
19. Reconnect the driver's airbag 2P connector to the cable reel 2P connector, and reinstall the access panel on the steering wheel.
20. Reconnect the battery positive cable, then the negative cable.
21. After installing the cable reel, confirm proper system operation:

-

Turn the ignition switch ON ; the SRS indicator light should come on for about six seconds and then go off.

-

Make sure both horn buttons work.

-

Make sure the headlight and wiper switches work. 

-

Go for a test drive, and make sure the cruise control switches work.

22. Enter the anti-theft code for the radio, then enter the customer's radio station presets.

Disconnecting/Connecting Connectors > < Cable Reel Replacement|Page 6993