Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
9. Slip the lower end of the steering joint onto the pinion shaft Nine up the bolt hole with the groove around the shaft), and tighten the lower bolt.
NOTE:
-
Connect the steering shaft and pinion with the cable reel and steering rack centered.
-
Be sure that the lower steering joint bolt is securely in the groove in the steering gearbox pinion.
-
If the steering wheel and rack are not centered, reposition the serrations at lower end of the steering joint.
10. Install the steering wheel.
11. Install the steering joint cover with the clamps and clips.
12. Connect the fluid lines to the valve body unit.