Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
6. Hold the damper shaft with a hex wrench and tighten the self-locking nut.
INSTALLATION
1. Loosely install the damper on the frame with the aligning tab facing inside, then loosely install the two flange nuts.
2. Install the damper fork over the driveshaft and onto the lower arm. Install the front damper in the damper fork so the aligning tab is aligned with
the slot in the damper fork.
3. Loosely install the flange bolt.
4. Loosely install a new self-locking nut with the flange bolt.
5. Raise the steering knuckle with a floor jack until the car just lifts off the safety stand. The floor jack must be securely positioned or personal injury
may result.
6. Tighten the flange bolt.
7. Tighten the self-locking nut.
8. Tighten the flange nuts on the top of the damper to the specified torque.