acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Disassemble|Page 4733 > < Disassemble|Page 4731
Page 5
background image

9. Install the disc spring.

NOTE:  Install the disc spring in the direction shown.

10. Soak the clutch discs thoroughly in ATF for a minimum of 30 minutes.

11. Starting with a clutch plate, alternately install the clutch plates and discs. Install the clutch end plate with flat side toward the disc.

NOTE:  Before installing the plates and discs, make sure the inside of the clutch drum is free of dirt or other foreign matter.

Disassemble|Page 4733 > < Disassemble|Page 4731