Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
4. Measure the clearance between the 2nd gear and the 28 mm distance collar with a feeler gauge.
NOTE: Take measurements in at least three places, and use the average as the actual clearance.
-
STANDARD: 0.10 - 0.18 mm 10.004 - 0.007 inch).
5. If the clearance is out of tolerance, remove the 28 mm distance collar and measure the width.
6. Select and install a new distance collar, then recheck.
7. After replacing the distance collar, make sure the clearance is within tolerance.