Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Clutch Disc: Service and Repair
TOOLS REQUIRED
-
07LAB-PV00100 Ring Gear Holder
-
07936-3710100 Clutch Alignment Shaft
-
07936-3710100 Handle
-
07NAF-PR30100 Clutch Alignment Shaft
-
Or Equivalent
REMOVAL
1. Remove the clutch disc and special tools.
2. Inspect the lining of the clutch disc for signs of slipping or oil. If it is burned black or oil soaked, replace it.
3. Measure the clutch disc thickness.
-
Standard (New): 8.4 - 9.1 mm (0.33 - 0.36 inch).
-
Service Limit: 6.0 mm (0.24 inch).
-
If the thickness is less than the service limit, replace the clutch disc.
