Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Flywheel: Specifications
DIMENSIONS
Clearance Between The Shift Piece And The Shift Arm Holder:
Standard .................................................................................................................................................................. 0.1 - 0.3 mm (0.004 - 0.012 inch)
Service Limit ................................................................................................................................................................................. 0.6 mm (0.02 inch)
Width Of The Groove In The Shift Piece:
Standard .................................................................................................................................................................. 8.1 - 8.2 mm (0.319 - 0.323 inch)
Clearance Between The Select Arm And The Interlock:
Standard .............................................................................................................................................................. 0.05 - 0.25 mm (0.002 - 0.010 inch)
Service Limit ................................................................................................................................................................................. 0.5 mm (0.02 inch)
Width Of The Interlock:
Standard ................................................................................................................................................................ 9.9 - 10.0 mm (0.390 - 0.394 inch)
Clearance Between The Select Arm And The 10 mm Shim:
Standard ............................................................................................................................................................... 0.01- 0.2 mm (0.0004 - 0.008 inch)
Clearance Between The Shift Arm Holder And The Change Piece:
Standard .............................................................................................................................................................. 0.05 - 0.35 mm (0.002 - 0.014 inch)
Service Limit ................................................................................................................................................................................. 0.8 mm (0.03 inch)
Groove Of The Change Piece:
Standard ...................................................................................................................................................... 12.05 - 12.15 mm (0.4744 - 0.4783 inch)
Clearance Between The Select Arm And The Change Piece:
Standard .............................................................................................................................................................. 0.05 - 0.35 mm (0.002 - 0.014 inch)
Service Limit ................................................................................................................................................................................. 0.5 mm (0.02 inch)
Width Of The Change Piece:
Standard ...................................................................................................................................................... 12.05 - 12.15 mm (0.4744 - 0.4783 inch)
TIGHTENING SPECIFICATIONS
Bearing Retainer Plate ......................................................................................................................................................................... 15 Nm (11 ft. lbs.)
Change Piece ........................................................................................................................................................................................ 30 Nm (22 ft. lbs.)
Oil Chamber Plate .......................................................................................................................................................................... 12 Nm (108 inch lbs.)
Rear Mounting Bolts ............................................................................................................................................................................ 64 Nm (47 ft. lbs.)
Reverse Change Holder ....................................................................................................................................................................... 15 Nm (11 ft. lbs.)
Shift Arm Holder [1]:
Bolt A ....................................................................................................................................................................................... 12 Nm (108 inch lbs.)
Bolt B ............................................................................................................................................................................................. 15 Nm (11 ft. lbs.)
Transmission Hanger:
A .................................................................................................................................................................................................... 27 Nm (20 ft. lbs.)
B ..................................................................................................................................................................................................... 24 Nm (17 ft. lbs.)
[1] Refer to exploded view for further information.
