acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Ring Gear, M/T > < Replacement|Page 5172
Page 1
background image

Carrier Bearings: Service and Repair

TOOLS REQUIRED 

-

07746-0030100 Driver, 40 mm I.D.

-

Or Equivalent

NOTE:  Check the ball bearings for wear and rough rotation. If bearings are OK, removal is not necessary.

1. Remove the ball bearings using a standard bearing puller and bearing separator as shown.

2. Install new ball bearings using the special tool as shown.

NOTE:  Drive the bearings squarely until they bottom against the carrier.

Ring Gear, M/T > < Replacement|Page 5172