Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
3. Support 3rd gear on steel blocks, and press the mainshaft out of the 3rd/4th synchro hub, as shown.
CAUTION:
-
Press the 3rd/4th and the 5th synchro hubs on the mainshaft without lubrication.
-
When installing the 3rd/4th and the 5th synchro hubs, support the mainshaft on the steel blocks, and install synchro hubs using a press.
-
Install the 3rd/4th and the 5th synchro hubs with a maximum pressure of 19.6 kN (14,466 lbs.).
NOTE: Refer to exploded view for reassembly sequence.
1. Support 2nd gear on steel blocks, then install the 3rd/4th synchro hub using the special tools and a press, as shown.
NOTE: After installing, check the operation of the 3rd/4th synchro sleeve and hub.