acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Windshield Washer Switch|Testing and Inspection|Page 9549 > < Windshield Washer Switch|Testing and Inspection|Page 9547
Page 1
background image

Windshield Washer Switch: Service and Repair

WIPERS - WASHERS SWITCH / REPLACEMENT

CAUTION:

All SRS wire harnesses are covered with yellow insulation. Before you disconnect any part of an SRS wire harness, disconnect the airbag connectors.

Whenever the ignition switch is ON, or has been turned OFF for less than three minutes, be careful not to bump the SRS unit; the airbags could
accidentally deploy and cause damage or injuries.

For additional precautions, refer to the SRS section See: Restraint Systems/Service Precautions. 

1. Remove the steering column covers.
2. Disconnect the 8-P and 6-P connectors from the switch.

Windshield Washer Switch|Testing and Inspection|Page 9549 > < Windshield Washer Switch|Testing and Inspection|Page 9547