Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
Rear Bumper: Service and Repair
Sedan
Rear Bumper Replacement
CAUTION: Wear gloves to remove and install the rear bumper.
NOTE:
-
An assistant is helpful when removing the rear bumper,
-
Take care not to scratch the rear bumper and body.
Sedan:
1. Remove the screw from each side.
2. Open the trunk lid, then remove the rear trim panel.
3. Disconnect the license plate light connector and grommet from the rear trunk area. Remove the clips and bolts, then remove the rear bumper.
4. If necessary, remove the license plate light harness, bracket and lens from the rear bumper.