Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
NOTE:
-
Apply adhesive along the edge where necessary to maintain a continuous seal and prevent water leaks.
-
Do not plug the elongated hole.
11. Install all removed parts, and fasten the door harness correctly.
12. Install the door panel.
NOTE:
-
Make sure the door harness is not pinched.
-
If necessary, replace any damaged clips.
-
Make sure the connectors are connected properly.
13. Install the armrest pocket and inner handle trim.
NOTE: Make sure the connector is connected properly.