Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
NOTE: Hold the adjusting bolts with a hex wrench or flat tip screwdriver when loosening the locknuts.
4. Repeat steps 2 and 3 until clearance "H" is within the specified limits, then fasten the center glass guide and roller guide. Press the stopper
plates against the glass stoppers, then fasten the stopper plates.
NOTE: Check that the stopper plates contact the glass stoppers evenly.
14. Adjust clearance "B" as follows.
1. Lower the glass 10 mm (0.39 in).
2. Push the glass outward 10 mm (0.39 in), then push the inside stabilizers against the glass lightly. Fasten the inside stabilizers.