Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
9. Installation is the reverse of the removal procedure.
NOTE:
-
Take care not to damage, wrinkle or twist the carpet.
-
Make sure the seat harness is routed correctly.
-
Slip the slits in the carpet over the rear console bracket.
-
Reattach the cut area (A) in the carpet as follow.
1. Clean the back of the carpet with a sponge dampened in alcohol.
Attach the fasteners to the edge of the carpet with double-faced adhesive tape.
2. Attach the other fastener as shown.
3. Align the carpet with the fastener, then press the carpet down securely.
-
Reattach the cut area under the parking brake lever and cut area (B) with wire ties as shown.
-
If necessary, replace any damaged clips.