Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
11. If camshaft-to-holder oil clearance is out of tolerance:
-
And the camshaft has already been replaced, you must replace the cylinder head.
-
If the camshaft has not been replaced, first check total runout with the camshaft supported on V-blocks.
Camshaft Total Runout:
Standard (New): 0.03 mm (0.001 inch) max.
Service Limit: 0.04 mm (0.002 inch)
-
If the total runout of the camshafts is within tolerance, replace the cylinder head.
-
If the total runout is out of tolerance, replace the camshafts and recheck. If the oil clearance is still out of tolerance, replace the cylinder head.
12. Measure cam lobe height.
Cam Lobe Height Standard (New)
INTAKE: 33.716 mm (1.3274 inches)
EXHAUST: 33.528 mm (1.3200 inches)
