Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
Piston: Service and Repair
If the Crankshaft Is Not Installed
1. Remove the connecting rod caps, then install the ring compressor, and check that the bearing is securely in place.
2. Position the arrow and the mark facing the timing belt side of the engine.
3. Position the piston in the cylinder, and tap it in using the wooden handle of a hammer.
NOTE: Maintain downward force on the ring compressor to prevent rings from expanding before entering the cylinder bore.
4. Position all pistons at top dead center.