Integra LS Sedan L4-1834cc 1.8L DOHC MFI (1999)
Crankshaft Main Bearing Seal: Service and Repair
Transmission End Crankshaft Seal
The seal surface on the block should be dry. Apply a light coat of oil to the crankshaft and to the lip of the seal.
1. Drive in flywheel end seal against right side cover.
NOTE: Drive the end seal in squarely.
2. Confirm that clearance is equal all the way around with a feeler gauge.
Clearance: 0.5 - 0.8 mm (0.02 - 0.03 inch)
NOTE: Refer to right column and 8-11 for installation of the oil pump side oil seal.